2006 Honda Ridgeline Air Intake Kit Manual Installation Instructions

Download
Tools Required 5/16″ nut driver Slotted screwdriver 10mm socket or wrench Ratchet and extension
Part List: 1 Air filter (replacement # 24-90035) or Pro Dry STM 21-90035 1 Housing 1 Housing Cover 3 Button Head Screws 2 Screws, M6x1x25 5 M6 Washers, flat 2 M6 Washers, lock
INSTALLATION: 1. Complete kit. Make sure all components listed are included prior to beginning installation. 2. Complete stock intake. 3. Remove the lower 10 mm bolt securing the air box. 4. Remove the 10mm bolt securing the back of the air box. 5. Remove the airbox assembly out of the engine compartment. 6. Loosen but do not remove the bolt securing the air intake snorkel. 7. Position the new housing inside the engine compartment. Make sure the lower mounting tab slide in the snorkel mount. 8. Secure housing with supplied bolts and washers. Connect intake duct to the housing. 9. Install intake filter into housing. Do not use any grease or oil to install air filter. 10. Install the aluminum cover and secure with the supplied button head screws. Your installation is now complete. Make sure you tighten all clamps and check all electrical connections. Re-check periodically.
Note: Filter Cleaning and Re-oiling: When cleaning your aFe filter, be sure to use only aFe’s “Restore Kit” (aFe P/N: 90-50001 blue oil aerosol, or aFe P/N: 90-50501 blue squeeze bottle oil. Filter Replacement: Magnum FLOW PN: 24-90035 (black w/blue media). Pro Dry S Pro Dry S Pro Dry S™ cleaning: see cleaning instruction sheet 06-00074 or Pro-GUARD 7™PN: 72-90021.or 72-35008 Pro-GUARD 7™ media, (black w/gold media). Pre-filters: 28-10011 yellow, 28-10012 red, 28-10013 black, and 28-10014 blue